![ivms 4200 remote access ivms 4200 remote access](https://i.ytimg.com/vi/_uQXYXUzB-4/maxresdefault.jpg)
IR receiver is not obstructed, ensure there’s a clear path between the remote control and the recorder.Batteries are fresh and not out of charge.Batteries are installed correctly and the polarities of the batteries are not reversed.If the remote control is operating properly (you see the light blinking), but there is still no response from the remote, please check the following: Press the DEV button on the remote control.As long as they match, they will be able to communicate. Basically, you will link that specific remote control with the recorder using the device number.
![ivms 4200 remote access ivms 4200 remote access](https://www.hantsolutions.com/wp-content/uploads/2020/05/iVMS-4200-Hikvision-Configuración-Agregar-NVR-1-1024x638.png)
![ivms 4200 remote access ivms 4200 remote access](https://i.ytimg.com/vi/OHLXUtF_X1w/maxresdefault.jpg)
Follow the tips listed below to fix any possible issues that you’re having with your remote control. Most of the Hikvision recorders (DVR or NVR) come with a remote control packed in the box that sometimes may not work at all, not react on time, or randomly go crazy.
#IVMS 4200 REMOTE ACCESS FULL#
Using a remote control you can navigate through your CCTV recorder’s menu, go full screen on certain cameras or speed them up, playback the saved footage, backup on a USB disk, adjust other settings, and much more. Although, using a mouse hooked up to the recorder is much easy, quicker, and flexible. You can learn more about using No-IP and Cameras here.Many people choose to use the remote control to access and control their security system. This will usually clear the error, and the device will then begin to communicate with our servers.Ĭongratulations! Your Hikvision device will now be sending out automatic DDNS updates to our server to ensure that you always stay connected.
#IVMS 4200 REMOTE ACCESS UPDATE#
If you receive this error and you’ve set up DDNS correctly with your No-IP account information, you will need to completely disable the DDNS settings for one hour, update the firmware (if needed), and re-enable the DDNS settings. Note: Hikvision is known to rarely give a false error “connection to server failed” even when configured correctly. It might say “ Connecting” for a while, but keep switching between the tabs and you should eventually see the “ Normal” status. If everything was entered correctly, you should see the following message:
![ivms 4200 remote access ivms 4200 remote access](https://i.ytimg.com/vi/tSJoo8MDy_4/maxresdefault.jpg)
Your DDNS setup should look similar to this:ĭepending on the web browser you are using, you may need to switch back and forth from the DDNS tab. This is because encoding special characters like “#” or “:” are generally not supported on CCTV devices so URL encoding must be used instead. In order for the update to send successfully, you will need to use the following format:ĭomain: YourNoIPDomain () Once everything is filled out correctly, click on the “Save” button.
#IVMS 4200 REMOTE ACCESS PASSWORD#
Password: Your Password to log into No-IP User Name: Your No-IP Account Email Address or Username In this example, we are using the Turbo HD DVR (DS-7200):ĭomain: The hostname you created for example: Start by accessing your Hikvision device by entering in the LAN address in the URL bar (ours happens to be 192.168.1.9, yours might be different):Įnter in your username and password and then log into your Hikvision device:įrom here, navigate to the DDNS page on your device ( Configuration > Network > Basic Settings > DDNS). This guide will help you setup and configure Dynamic DNS within your Hikvision Camera/DVR/NVR.